Products

Mechanical Water Seal
Mechanical water seal MG13 is Chinese rubber bellow burgmann MG13 mechanical seal for pump. But for clean machine. Viton material can use in higher temperature fluid.
Features
Mechanical water seal MG13 is Chinese rubber bellow burgmann MG13 mechanical seal for pump. But for clean machine. Viton material can use in higher temperature fluid.

Product Parameter
|
Place or Origin |
Zhejiang China |
|
Model number |
CLG13 |
|
Type |
From 24mm~40mm |
|
Temperature |
-20℃~120℃ |
|
Pressure |
≤1.2Mpa |
|
Speeds |
≤10m/sec |
Material Choose
- Bellows(NBR/EPDM/VITON)
- Spring Holder(SUS304/SUS316)
- Spring(SUS304/SUS316)
- Retainer(SUS304/SUS316)
- Rotary Ring(Hot-pressing/Carbon/lmpregnated Carbon/SIC/TC)
- Stationary Ring(Ceramic/SIC/TC)
- O Ring(NBR/EPDM/VITON)
What are the components of Mechanical Water Seal?
Mechanical Water Seal is commonly used to prevent liquid leakage, especially in equipment involving water or other liquids. Its main function is to provide sealing while allowing rotating or moving parts to operate in a liquid environment. Mechanical water seals are generally composed of the following main components:
● Sealing Faces: These are the main surfaces that come into contact with the sealed liquid and are usually made of hard materials such as carbon, ceramic or metal. The contact between the sealing faces can prevent liquid leakage.
● Springs: Springs are used to maintain the contact pressure between the sealing faces to ensure the sealing effect. They are usually helical springs and the pressure can be adjusted as needed.
● O-Rings or other sealing elements: These components are used to provide additional sealing to prevent liquid from leaking beyond the sealing surface. Common materials for sealing rings include rubber, polytetrafluoroethylene (PTFE), etc.
● Housing: The housing is the external support structure of the water seal, usually made of metal materials, ensuring that all components are properly docked and providing necessary support.
● Lubrication Fluid: To reduce wear on the sealing surface and improve the sealing effect, lubrication fluid is usually used, especially in high temperature or high pressure environments. Lubrication fluid also helps reduce friction.
● Shaft Sleeve: A shaft sleeve is a protective sleeve installed on a rotating shaft to prevent the shaft from directly contacting the sealing surface, thereby reducing wear.
● Rotating Elements: The rotating elements of a water seal usually include parts that are directly connected to the shaft and can rotate during mechanical movement while maintaining the sealing function.
● Stationary Elements: Stationary elements are usually fixed to the fixed part of the equipment to provide support and sealing surfaces.
Features of Mechanical Water Seal
1.Efficient sealing performance:
Mechanical water seals can effectively prevent the leakage of liquids (such as water, oil, etc.) through precise sealing surface and pressure control. The sealing surface is usually made of hard materials (such as carbon, ceramic, etc.), which ensures long-term sealing performance.
2.High temperature and high pressure resistance:
Mechanical water seals can usually be used in high temperature or high pressure environments, suitable for equipment such as pumps, compressors, and agitators, and can withstand more demanding working conditions.
3.Reduced friction and wear:
The lubricating fluid (such as water or oil) in the mechanical water seal helps to reduce the friction between the sealing surfaces, thereby reducing wear and extending the service life of the water seal.
4.Self-adjusting function:
Many mechanical water seals are designed with a self-adjusting function, which can automatically adjust the pressure between the sealing surfaces to adapt to changes in operation and further improve the sealing effect.
5.Compact structure:
Mechanical water seals are usually compact in design and take up little space, so they are suitable for applications in limited spaces.
6.Wide range of applications:
Mechanical water seals are suitable for a variety of liquids (including water, oil, etc.), and are widely used in mechanical equipment such as pumps, mixers, bearings, centrifuges, etc., especially in situations where efficient sealing and leakage prevention are required.
7.Reduce leakage and environmental pollution:
The mechanical water seal has excellent sealing performance, can effectively prevent liquid leakage, reduce environmental pollution, and meet the requirements of environmental protection and energy saving.
8.Low maintenance requirements:
Once installed correctly, the maintenance requirements of the mechanical water seal are low. Regular inspection and replacement of seals are sufficient, which is especially suitable for equipment that works continuously for a long time.
9.Strong adaptability:
The mechanical water seal design adapts to different working conditions, such as different speeds, pressures, temperatures, etc., and has strong adaptability.
Precautions for use of Mechanical Water Seal
Pre-installation inspection
● Before installation, ensure that all parts of the mechanical water seal (such as sealing surface, spring, sleeve, etc.) are not damaged or defective. Damaged parts may cause the sealing performance to deteriorate.
● Check whether the model and size of the mechanical water seal match the equipment to ensure proper installation.
Correct installation method
● During the installation process, ensure that the surface of the sealing surface and accessories is clean and free of impurities to prevent foreign matter from affecting the sealing effect.
● During installation, ensure that the mechanical water seal is aligned correctly and the contact of the sealing surface is uniform. Avoid excessive force to avoid damaging the sealing component.
Lubrication and cooling
● When using a mechanical water seal, ensure that the sealing surface has sufficient lubrication and coolant (such as water or oil). Lack of lubrication will increase friction, which will increase wear and shorten the service life of the water seal.
● Use appropriate lubricants and avoid using chemicals that will damage the water seal material.
Control the working environment
● Pay attention to controlling the working pressure and temperature of the mechanical water seal to avoid exceeding the design range. High temperature or high pressure conditions may cause excessive wear or failure of the sealing surface.
● Ensure that the equipment runs smoothly when starting and stopping to avoid damage to the seal due to instantaneous impact.
Regular inspection and maintenance
● Check the working status of the water seal regularly to observe whether there is leakage, temperature rise or abnormal vibration.
● If leakage or wear is found, replace the seal of the mechanical water seal or repair it in time to avoid abnormal operation of the equipment.
Avoid dry grinding
● During the installation and use of the mechanical water seal, ensure that the sealing surface is always lubricated. If dry grinding occurs, friction will increase and may cause seal failure.
● If the water seal needs to be shut down for a period of time, the lubrication status should be checked regularly and lubricant should be added.
Keep the sealing surface clean
● The sealing surface of the mechanical water seal is very critical, and any foreign matter (such as dust, impurities) should be avoided to avoid damage or leakage of the seal.
● During maintenance or replacement, keep the working environment clean to avoid contamination of the seal.
Use appropriate sealing materials
● Select appropriate sealing materials according to the type of medium (such as water, oil, chemical liquid, etc.) and the working environment (such as temperature, pressure, etc.). Different sealing materials have different high temperature resistance and corrosion resistance.
Avoid over-tightening
● During installation, avoid over-tightening the mechanical water seal. Excessive pressure will affect the contact between the sealing surfaces and cause seal failure. Tightening should be performed according to the manufacturer's recommended torque.
FAQ
Q: Are you trading company or factory?
A: We are factory, so we can offer you factory price with high quality.
Q: How long is your delivery?
A: For stock items,we can ship them immediately after received payment.
For other items,we need 15~30 days for mass production depends on the quantity and types of the order.
Q: What's your payment terms?
A: TT 30% as deposit, and the balance is paid against the copy of B/L. As for the amount under USD 2000. 100% deposit payment is needed.
Hot Tags: mechanical water seal, China mechanical water seal manufacturers, suppliers, factory, En 12756, Submersible Pump Mechanical Seal, Mechanical Water Seal, Screw Pump Mechanical Seal, Chesterton Mechanical Seals, Mechanical Face Seal
You Might Also Like
Send Inquiry

