Knowledge

Principle and structure of mechanical seal

Mechanical seal is a kind of seal that uses two smooth end faces perpendicular to the rotating shaft to achieve sealing. Under the joint action of liquid pressure and elastic compensation, the shaft is guaranteed to be leak-free. Its main function is to avoid leakage of fluid in the pump body during the operation of the pump, thereby ensuring the smooth and reliable operation of the pump.

 

A typical mechanical seal consists of a dynamic ring, a static ring, an elastic compensation mechanism and an auxiliary seal. On the smooth contact surface between the dynamic ring and the static ring, the dynamic ring is pressed against the static ring by the pressure of the medium, and a layer of liquid film is formed on the surface between the dynamic and static rings, which can effectively prevent the medium from penetrating and play a sealing role. The elastic compensation mechanism ensures that the dynamic ring and the static ring remain in a tightly locked state when the pump stops, so as to prevent foreign matter from entering the contact interface, thereby avoiding seal failure caused by surface wear during the startup process.

 

Mechanical sealing technology is mainly divided into two categories: single-end face and double-end face mechanical seals.

Single-end face mechanical seals rely on elastic pressure mechanisms to ensure the close fit of the dynamic ring and the static ring sealing surface, and are suitable for media environments with good lubrication performance and tolerance to trace leakage. Its structural design is simple and the installation process is convenient and quick.

 

The double-end mechanical seal consists of two sets of sealing surfaces, one set is used to isolate the medium in the pump casing from the medium in the sealing chamber, and the other set is responsible for isolating the medium in the sealing chamber from the external air. By injecting a sealing liquid with a pressure 0.01~0.15MPa higher than the pump chamber pressure into the sealing chamber, the leakage problem between the medium and the air is effectively prevented. This sealing method is particularly suitable for media with poor lubrication performance or containing flammable, explosive, toxic components and high impurity content.

You Might Also Like

Send Inquiry