Knowledge

The form and working principle of the mechanical seal of the water pump

A mechanical seal is a non-filled, face seal device that limits leakage of working fluid along a rotating pump shaft. It is mainly composed of a static ring, a moving ring, an elastic element, a transmission element and an auxiliary sealing ring.

 

When the mechanical seal works, it relies on the moving ring fixed on the shaft and the static ring fixed on the pump casing, and uses the elastic force of the elastic element and the pressure of the sealing fluid to promote the close contact of the dynamic seal and the static ring end face to achieve the sealing function. In the mechanical seal device, the pressure shaft seal water prevents high-pressure water leakage on the one hand, and on the other hand, it presses into the moving ring and static ring to maintain the flow of a layer of lubricant film, so that the end faces of the moving ring and the static ring do not touch. Since the flow membrane is very thin and subjected to high-pressure water, there is almost no leakage. between the static ring and the sealing gland; Between the moving ring and the rotating shaft, as well as between the sealing gland and the housing, auxiliary sealing rings are used to address the sealing of these leak points.

 

You Might Also Like

Send Inquiry