News

Common Sense Of Choosing And Buying All Kinds Of Seals?

1. The density of epoxy modified single-component products varies from 1.1 to 2.8, and the curing time is 50 degrees/4 hours or 110 degrees/30 minutes or 110 degrees/50 minutes;


2. It has moderate thixotropy, covering and wrapping electronic components on the circuit board, and the glue can step on its own, but does not flow, and does not flow during baking and curing, maintaining the original shape;


3. The cured material is black or amber bright, strong adhesion to circuit boards and electronic components, and can withstand 200-300 °C high temperature and strong acid desulfurization pump with mechanical seal alkali corrosion and resistance to various solvents;

 

4. High bonding strength, good heat resistance, adhesion can reach device damage, temperature resistance can also achieve device damage, cured matter is not eroded by professional solvents, can make circuits and electronic components get favorable protection, prevent internal technology leakage of devices;


5. This product is suitable for confidential potting of electronic devices, and has strong solvent resistance of stirring mechanical seals after curing, and can withstand long-term immersion of organic solvents; It has extremely high heat deflection temperature and can resist high temperature damage; At the same time, it has good hardness and wear resistance, and can resist the etching damage of general cutting edges.


6. This product is easy to use, long storage period, high bonding strength, fast curing speed, low shrinkage, non-toxic and harmless.

 

You Might Also Like

Send Inquiry