Technical requirements for mechanical seals
The sealing ring is the general term of the moving ring and the static ring (the same below), which is the most important component of the mechanical seal. The sealing ring largely determines the performance and life of the mechanical seal, therefore, some requirements are put forward for it.
There is enough strength and stiffness
Under working conditions (such as pressure, temperature and sliding speed, etc.) are not damaged, the deformation should be as small as possible, and the sealing can still be maintained when the working conditions fluctuate. In particular, the sealing end face should have sufficient strength and certain corrosion resistance to ensure that the product has a satisfactory service life.
It has good thermal shock resistance
For this reason, the material is required to have a high thermal conductivity and a small coefficient of linear expansion, so that it will not crack when subjected to thermal shock.
Small coefficient of friction
The seal ring matching should have a small coefficient of friction.
Good self-lubrication
If a short period of dry friction occurs during work, it will not damage the sealing end face. Therefore, the sealing ring should have good self-lubrication, and the sealing ring material and sealing fluid should also have good wettability.
Simple structure
The sealing ring structure should strive to be simple and symmetrical, giving priority to the use of integral structure, or combined (such as mounted) sealing rings, and trying to avoid the use of sealing end spray structure.
Sealing rings should be easy to process and manufacture
Installation and maintenance should be convenient and inexpensive.

